Size Guide
RING SIZE GUIDE
-
Wrap string or paper around the base of your finger.
-
Mark the point where the ends meet with a pen.
-
Measure the string or paper with a ruler (mm).
-
Pick the closest measurement on the ring size chart to find your ring size
|
CIRCUMFERENCE (mm) |
DIAMETER OF RING (mm) |
BARE JEWELS SIZE |
USA & CANADA |
AUSTRALIA & NZ |
ASIA | EUROPE |
| 49.3 | 15.7 | 5 | 5 | J | 9 | 49 |
| 51.8 | 16.5 | 6 | 6 | L | 11 | 51.5 |
| 54.4 | 17.3 | 7 | 7 | N | 14 | 54 |
| 56.9 | 18.2 | 8 | 8 | P | 16 | 56.5 |
| 59.5 | 19 | 9 | 9 | R | 18 | 59 |
| 62.1 | 19.8 | 10 | 10 | T | 20 | 61.5 |
| 65 | 20.6 | 11 | 11 | V 1/2 | 23 | 64 |
| 67.2 | 21.4 | 12 | 12 | X 1/2 | 25 |
68 |
BANGLE SIZE GUIDE
- Make a fist: Close your hand into a fist to make the knuckles prominent.
- Position your hand: Imagine your hand is a four, with the thumb touching the palm and the fingers together.
- Measure the widest part: Using a flexible tape measure or a strip of paper and a ruler, measure the distance across the widest part of your hand, between the center of your pinky knuckle and the center of your index knuckle.
- Mark and measure: Mark the overlapping point on the paper strip and lay it flat to measure the length with a ruler.
- Choose your size: This measurement is your required bangle diameter.
- For a snug fit: Choose a bangle with a diameter close to your measurement.
- For a looser fit: Choose a bangle that is one size up from your measurement.
- For a loose fit: Add approximately 1.9 to 2.5 cm to your wrist measurement.
|
WRIST LENGTH (mm) |
BANGLE INNER DIAMETER (mm) |
|
188 - 195mm |
S - 60mm |
|
201 - 207mm |
M - 65mm |
|
214 - 220mm |
L - 70mm |